 |
 |
 |
|
Encounter Two Way Reclining Lift Chair Order Online Or
Call 1-866-606-3991
Whether it's age, injury, arthritis, or any other condition that makes standing up difficult, our new line of lift chairs makes getting on your feet easy and pain free. With the push of a button you can get In, or Out, of your seat in just moments. With a super quiet motor, no sag seat springs, vibrating sections, heating pads, and a lifetime warranty, you can sit worry free and comfortable for as long as you own your lift chair.
Features:- Economy 2 Way Recline
- Hardwood Frame
- Heat & 2 Vibe Standard
- 2 Year Warranty on all Components
- 325 lb weight limit
- Available in Encounter Fabrics Only
- Backlit hand control
- 2 Way Recline
- 2 Vibe Heat
- Low Voltage Quiet Motor
- Fiber Filled Back
- Acella-Flex Foam Backing
- 5 No-Sag Seat Springs
- Magazine Pocket On Right Side
- Battery Back UP System
- 2 Year Warranty
 Order Online Or
Call 1-866-606-3991The frame of the chair is all kiln dried hardwood. All stress points are kiln dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly independent lab tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are grade 5 (and we are the only lift chair company that uses grade 5 bolts). Bolts go entirely through the wood. No lag screws are used to secure the mechanism. Each mechanism is secured by special locking T-nuts to insure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for reclining hardware, etc., have a double locking nut, nylon aircraft grade locking nut. All wood screws that are used are the best and strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to help keep the back straight and square. Order Online Or
Call 1-866-606-3991Dimensions:- Overall Width: 31.5"
- Overall Depth: 41"
- Overall Height: 41.5"
- Reclined Length: 60"
- Ottoman To Seat Length: 37"
- Seat Width: 21"
- Seat To Top Of Arm: 6"
- Seat Height: 19"
- Back Height From Seat: 25"
- Ottoman Height From Floor: 19"
Acella-Flex foam is used for padding, as it is the closest to a perfect seating configuration in the industry. It basically pushes back 1 lb. For every pound of weight exerted, making the chair sit the same for a person of 90 lbs. or a person of over 300 lbs. It retains 99.9% of its original shape and size. Most conventional foam will shrink 10 - 15% in size over the first couple of years. We use a special break-in process before the foam is ever cut to make the foam feel good from its first use. Additionally, we glue a layer of super soft on top of the Acella-Flex, giving a very nice feel to the seat; but you still have the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure reducing. At this time, no other life chair manufacturer uses this seating configuration or benefit.
|
|
|
 |
|
 |
|
|
|
