The 1000LB RV Motorcycle Carrier Diesel Pusher Electric Hydraulic Lift strongest unit yet. It travels using a T Channel which allows us to make the overall height of the unit much small while upgrading the strength. The T Channel is also has a fail proof design made from ¼” plate. Everything on this unit has been reinforced. We added strength for towing by using two Sway Lock pins so the load is pulled through the whole unit and not just the T channel. These pin holes are reinforced with 3/8” plate. This means no back and forth sway when traveling and towing. The hydraulic motor comes loose and needs to be stored in a storage compartment. The motor needs to be wired directly to a battery. The hydraulic cylinder is power up and gravity down. It comes with a quick disconnect for the hose. We will need a measurement for the hose from your hydraulic motor to the back of your motor home. The motor is remote operated on a ten foot long cord and is removable.
The RV Motorcycle Carrier Diesel Pusher can be adapted to use the 850 platform or the 750 platform. It has six integrated tie down points. Supports a motorcycle up to 1000lbs and can flat tow a vehicle up to 6,000lbs when you use the three point hitch, it weighs just 280lbs.
We recommend that this hauler be use by vehicles with a class IV or V hitch. The heavier the hitch the better. The receiver size needs to be 2” square or else you need a receiver reducer. Please consult with your vehicle or hitch manufacturer for complete requirements and specifications for your specific hitch.
