150w HPS Grow Light System Indoor Hydroponics
Timer: (Free Gift)
This latest 150W High Pressure Sodium(HPS) Grow Light System will
accelerate development and hearty flowering! The balanced spectrum light
is well absorbed by the chlorophyll to make your plants more
flourishing and blooming. It is especially productive for flower
seedling development. Comes with a Free Timer to help you to control the
lighting time conveniently, especially when you are not in your garden.
Safe and Environmental Friendly.
150W High Pressure Sodium Bulb:
- Power: 150 watts (High efficiency)
- Expected Life Span: 24,000 hours
- Lumen: 15,000 lumens
- Color Temperature: 2,000K
- Contains more red spectrum, which is best for flowering.
- Non-luring insects
- Strong power to penetrate fog
- High output, high Luminescence Efficiency
- Fits all standard 150 watts HPS grow light systems
- Fit for the Heliophile, such as Rose and Camellia, which grows
better at longer sunshine time.
- Dimensions: 2in.(dia.) x 7-4/8in.(L)
150W Digital Electronic Ballast:
- High power 150 watts
- Fit for 150 watts High Pressure Sodium Lamps or 150 watts Metal
- Pass FCC and CC Certificate
- Low Noise
- Energy saving and environmental friendly
- Stabilize input power and output luminous flux
- Reduce wastage and improve usable efficiency of power supply
- Shielded component to protect against Radio Frequency Interference
to other equipment
- Prevent the electricity from striking the bulb repeatedly and make
the bulb nigrescence prematurely
- Protect your eyes when continually working
- Researched and invented in Germany
- Rated Power: 150 watts
- Specified Frequency: 50Hz
- Working Voltage Range: 120V/240V
- Working Environment Temperature: (-25-60) degree Centigrade
- The High Temperature of Outer Cover: 35 degree Centigrade
- Install Space Requirement: 6-1/4in. x 3-1/8in. x 2-3/4in. (16cm x
8cm x 7cm)
- With a 6-1/2ft. power cord to wall
Extra Large Reflector:
- Air cooling
- Assemble with ballast to save room
- Adjustable angle at will to meet all your needs
- Large aluminum reflector fitting 600 watts grow light system
reflects most light to your plants
- You could upgrade your light system up to 600 watts just by
replacing the bulbs and the ballast
- Dimensions: 18-1/2in.(L) x 18-1/2in.(W)
- Safe and easy to use
- Ensure timer is disconnected from power supply.
- Press down the segment pushbuttons according to how long you
require the system to stay on.
- Each segment is 15 minutes.
- Turn the timer dial until the black pointer is set to the present
- Plug in your grow light system to the timer and then the timer to
the power supply socket and switch the socket on.
- Timer and your light system go working till the stop time.
- The timer can be overridden by moving the red switch on the side.
- Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz
- 1x 150W High Pressure Sodium Bulb
- 1x 150W Digital Electronic Ballast
- 1x Extra Large Reflector
- 1x Light Socket
- 1Set Hi-Low Yoyo Hood Hanging kit
- 1x Free Timer