High Quality Iota Smart
Battery Charger / Converter 40 amps 24V

ORDER ONLINE NOW
OR CALL (866) 606-3991
Using state-of-the-art, switch-mode technology, IOTA Power
Converter/Battery Chargers are engineered with the user and variable
environmental conditions in mind. Extra care has been given to insure
many years of service-free operation, even when subjected to extremely
harsh conditions. Batteries are charged quickly and efficiently without
over-charging and pumps, motors, and fans operate perfectly for
prolonged life.
Exceptionally clean DC output insures pumps, motors,
fans, and lights work perfectly. This means longer life for any
connected load; virtually no AC ripple to cause static or premature
failure of radio or television equipment.
Quickly and efficiently
charges batteries from the full rated output of the IOTA battery
charger. The battery charger then maintains the batteries, only putting
into the battery what is required by load or self-discharge, cutting
back to milliamps as the battery requires.
ORDER ONLINE NOW
OR CALL (866) 606-3991Features:
Protection against low and transient AC line voltage as well as spikes
coming from the AC power source or from improperly adjusted generators, a
major cause of converter/power supply failure.
Meets F.C.C. criteria, minimizing radio and television equipment interference especially on the lower frequency bands.
Can be used with or without a battery. When used as a converter/power
supply, the IOTA power converter will only supply what is required
by the load. When not in use it is essentially off, reducing electricity usage.
Lower operating temperature half that of some switch mode electronic
models, even in its subcompact size. This means substantially longer
life and safer operation.
Tight line-load regulation ensures that
the output voltage holds steady from no load to full load. This keeps
pumps, motors, and lights working at the correct voltage even during
brown-out situations.
Proportional Fan Circuitry provides an extra measure of protection.
During times of heavy load demands, the automatic circuitry will
activate the fan before thermal stress can
occur on any internal components.
External fuses protect the IOTA unit against improper wiring and can be quickly and easily replaced.
Multiple units can be operated in series or parallel to increase amperage for additional power
Specs:
DC Output Voltage (No Load) approx:27.2V (DC).
Output Voltage Tolerance (No Load): +/- .5%
Output Amperage, Max Continuous: 40 amps
Output Voltage (Full Load) approx: 27V (DC)
Maximum Power Output, Continuous: 1100 Watts
Ripple and Noise: <50 mV rms
Input Voltage Range: 108-132 AC
Input Voltage Frequency: 47-63
Maximum AC Current @108Vac: 20 amps
Typical Efficiency: >80%
Max Inrush Current, Single Cycle: 40 amps
Short Circuit Protection: yes
Overload Protection: >100%
Line Regulation: 100 mV rms
Load Regulation: <1%
Fan Control: proportional
Thermal Protection: yes
Working Temperature Range: 0-40C
Storage Temperature: -20 to 80C
Withstand Voltage: 1240V @ leads
Dimensions: 13” x 6.5” x 3.4”
Weight: 7.8 lbs * Can be used with the IOTA IQ-4. Take your DLS
Battery Charger to the next level... The IQ Smart Controller offers
automatic charging control for DLS Battery Chargers, providing longer
and safer use of your system's battery. The IQ Smart Controller is
compatible with any DLS Battery Charger model and is covered under our
standard Two-Year Warranty.
ORDER ONLINE NOW
OR CALL (866) 606-3991