• Solid body structure
• Fast and steady steam output: Please allow about 8~15 minutes for steady steam.
• Automatically water supplementing: Intelligent water level detecting system will automatically fill in water if needed. Ease your mind and Never burn out your generator.
• Manual drain model: For auto drain function generator, please check our NTA auto drain model or NTC series steam generator
  
• Multi-protection:  Multi-sensor system, Over heat protection, short-of-water protection, inner tank high-pressure protection.
• Industrial Grade Incoloy heating elements with Teflon coating, extremely anti-corrosion and durable which make your heater serve you better and longer!!
• Upgraded accessories: New and more reliable safety relief valve; new waterproof connector; new low-noise steam nozzle.
• Easy installation and maintenance.

Important:  Installation by a licensed electrician is recommended.

ORDER ONLINE NOW

OR CALL 866-606-3991

Display Unit Specifications

• Dimensions:  4"x4.5"x1" (Wide x Height x Depth)  10cm x 11.5cm x 2.5cm
• Weight: 0.5 lb (150g)
• Temperature display range: 43－140℉ (6－55℃)
• Temperature setting range:  95－131℉ (35－60℃)
• Working time range: 0~60 minutes or 'CH' Non-stop mode
  
• Display: Environmental temperature in Fahrenheit . 
• Indicator for setting-temperature in Fahrenheit
• Indicator for the heating elements and light status
  

ORDER ONLINE NOW

OR CALL 866-606-3991

Steam Generator Specifications

• Output power: 9000W (9KW)
• Input Voltage: 240V
• Current: 37.5A
• Required Breaker: >45A
• Suitable for 283~388 cubic feet well-insulated steam room with at least 7' ceiling
• Controller: NT-200 programable digital controller
• Dimensions: 476x186x450mm (18.7x7.3x17.7 inch)
• Available Certification: CE (The CE marking certifies that a product has met EU consumer safety, health or environmental requirements.)
• ISO9001: ISO 9001:2008 Quality management systems qualified.
  

ORDER ONLINE NOW

OR CALL 866-606-3991

Generator Sizing

• Multiply the Length _____ x Width _____ x Height _____ = Room Volume
• Adjustments to Room Volume:
• Ceramic Tile: is multiplied by 1.30
• All Glass tile or Glass Block Walls: is multiplied by 1.35
• Porcelain tile: is multiplied by 1.60
• Natural stone tiles* up to 1/2": is multiplied by 2.00
• Natural stone slabs over 1/2": is multiplied by 2.25
• Add all figures above to obtain the Total Room Volume required = Total Adjusted Room Volume.

ORDER ONLINE NOW

OR CALL 866-606-3991