The Crossfire Insert conveniently lights with an electric igniter. It comes with five heat level settings, and offers the option of being thermostatically controlled. The Crossfire Insert has a stir rod for self cleaning burn pots and is approved for use with zero-clearance fireplaces. This efficient, safe heat source will add beauty and comfort to your home.

• 97% Efficiency
• Maximum Heating Capacity: 54,000 BTU
• Heavy Gauge Steel Construction
• 230 Pounds Corn
• Hopper Size 75 pounds
• Black, Gold or Nickel Door & *Trim Options
• Anti Clinker Stainless Steel Stir Rod
• Air Wash Equipped for Cleaner Glass
• IntelliChoice™ Touch Pad Control
• Room Air Blower Standard
• Mobile Home Approved
• Approved for Installation into Zero-Clearance Fireplaces
• Thermostat Ready

• Height: 19 1/2" back, 22 3.4"
• Width: rear-24", front-29"
• Depth: 14 1/4" behind shroud, 10" in front of shroud
• Weight: 230lbs
• Direct exhaust vent size: 4"
• Heavy duty heat exchanger: 14 tube
• Room air blower: 160cfm
• Heat level settings: 5
• Fuel Type: Corn
• BTU/Hr: 10,000-54,000 (corn)
• Hopper capacity: 75lbs (corn)
• Heating capacity: Up to 2,500 sq/ft
• Efficiency: up to 99%
• combustion efficiency

• Built-in Igniter
• IntelliChoiceTM Control Board
• Thermostat-Ready
• Mobile Home Approved
• Clean Glass Air Wash Equipped
• Zero Clearance Box Approved
  

• Daily:  Clean top heat exchangers, empty ash drawer if needed, clean firepot
• Daily:  Open draft slide out all the way , burn for a few minutes and then return to setting, fill fuel hopper
• Weekly:  Clean fly ash behind all clean out slides
• Weekly:  Clean firebox and firepot areas, vacuum out hopper fines
• Weekly:  After glass cools wipe with damp cloth to clean ash accumulation
• Monthly:  Remove firepot and check that the air holes are all open
• Monthly:  Clean all areas in firebox, cleanouts,
• Monthly:  Clean exhaust pipe cleanout tees, check connections if needed

• Yearly:  Empty hopper of all fuel, vacuum and lightly oil
• Yearly:  Spray chain with light oil, adjust if needed
• Yearly:  Vacuum all electrical motors and back of unit cabinet
• Yearly:  Clean out firebox area, lightly oil
• Yearly:  Remove brick board (if applicable) and spray light oil on inside of stove