• Model: WP-GT-75
• Weight: 220 lbs.
• Material: Heavy Duty 11 gauge Carbon Steel
• Powder coated grey corrosion resistant
• Overall dimensions: 31.5" L x 23.25" W x 30.75" H
• Box length: 22" inches
• Cover length: 29" inches
• Flow control tee: 4" pipe
• Inlet / Outlet: 4" pipe

Features

• Removable baffles for easy maintenance and clean out.
• Constructed of 11 gauge carbon steel w/corrosion resistant coating.
• T-vent for proper air venting is included.
• Designed for removing fat, oil and grease from waste water.
• Main body suspended from floor to avoid corrosion.

Installation

1. Remove the flow control tee from inside the interceptor.
2. Locate the interceptor "inlet" and "outlet". Position inlet closest to the equipment that the interceptor will be servicing.
3. Install the flow control tee between equipment and inlet valve on the interceptor as illustrated above.
4. Vent the flow control tee as illustrated above to ensure optimal performance of your interceptor.
5. Replace the lid and securely tighten retaining lid bolt.
6. Check integrity of connection to the interceptor and repair and leaks as needed.
7. Make sure all seals are assured.