Home > Electronics > Computers & Tablets > 3D Printers >

  Brand New D4 3D Printer - Transparent Case
Brand New D4 3D Printer - Transparent Case


 
Like Us On FaceBook + Google & Receive Extra Savings, Call 1-866-606-3991

Text The Word: SAFER To 555888 For Extreme Steals And Deals!

Sign Up For VIP Steals & Deals...
LIST PRICE: $1,855.95
TOMORROW'S PRICE: $1,699.95
DEC. 19th 12 HR SALE: $1,374.95
You save $481.00!

Product Code: WAN-D4TRANSPARENT

Filament Color Combinations

  
Shipping

Choose Shipping Method*:
  
Terms & Conditions

I Agree To Terms & Cond.

Description
 

Brand New D4 3D

Printer - Transparent Case



The D4 is our first dedicated 1.75 mm filament extruder. This extruder was designed from scratch, and contains a number of custom manufactured parts. Weve learned a lot over our past extruder designs, and incorporated a lot of those lessons here: thats why its smaller, lighter, and faster to build. And since its designed from the ground up for 1.75 mm filament, its light-years ahead of past designs in small-filament reliability.
The layer alignment is much better which results in nicer prints and higher resolution, 100 micron inch.

Weve completely overhauled the drive system to give the optimum positioning accuracy. The entire system has been upgraded to sturdy 3/8? diameter linear shafting. This is probably overkill, but you can trust that the axes will be sturdy. Weve also switched to self-aligning, sintered stainless steel bearings. These are very forgiving to DIY assembly and provide a nice, smooth motion on the steel shafts. Weve completely replaced the Z axis with a stepper driven, cantilevered stage. Guided by two of the linear shafts, this completely eliminates any Z wobble and results in nicely aligned layers. Using a high-angle lead screw, we were able to increase the speed of the Z axis from 150mm/minute to 1,000mm/minute. This means the layer changes are almost completely imperceptible.


Connect over USB and hit print the machine will calibrate itself and start printing.

The new electronics have been designed to make the printing experience easier than ever. The Duplicator connects to your computer via a standard USB cable thanks to a USB chip on the motherboard. Weve also added full end stop support so that you never need to touch the XYZ axes ever again. When you hit print, the machine will automatically home itself, heat up, and begin printing. All you have to do is sit back and relax while your Duplicator four does all the work. Living in the future is awesome. Oh yeah, and the electronics are all inside, so you dont have wires dangling everywhere.

Or you can print with SD card. Sometimes customer failed in printing with computer USB link, due to the computer sleep or shut down automatically. For this reason, we developed SD card reader on printer. Awesome, all your printer job can be done by this small card. 2G card is sufficient for any 3D file and keep as many file as you like. Simple and fast is our mission.

Order Online Now
Or Call 1-866-606-3991



Order Online Now
Or Call 1-866-606-3991



Specifications

  • Interface: SD or USB Link
  • Max Printing Object Size: 8.9x5.7x5.9 in.
  • Circuit: 5th generation, Max Support 5 Motor
  • X,Y Axis Positioning Resolution: 0.02mm
  • X,Y Axis Max Speed: 196.8 in./minute
  • Z Axis Positioning resolution: 0.005mm
  • Z Axis Max Speed: 39.4in./minute
  • Product Dimension: 12.6 x 18.4 x 15 in.
  • Packing Dimension: 22 x 16.5 x 20.5 in.
  • Material Support: ABS and PLA
  • Material Size: 1.75mm wire
  • Material Size Requirement:1.75+-0.1mm
  • Temperature Sensor: Thermocouple Temperature Sensors
  • Position resolution: 0.1mm
  • Layer: 0.1mm -0.4mm
  • Vertical Printing Speed: 15Cubic Centi-Meter/ Hour
  • Object Size: 8.9 x 5.7 x 5.9 in.
  • LCD Display Optional
  • Filament Material Type: ABS, PLA
  • Color: Wanhao over 43 colors for choice
  • Filament size: 1.75mm/.07 in.
  • 1 Roll Filament weight: 2.2 lbs.
  • Components Specifications: MK7 + Double Extruder 1 pc
  • Max temperature: 500F
  • Printer Dimension: 12.6 x 18.3 x 15 in.
  • Printer Weight: 26.5 lbs.
  • Electric Power Supply: 220V / 110V (Universal power supply, take IEC cable)
  • Output: 200W
  • Software Format: STL, G code
  • Operation System: Windows 7, Vista, Linux, Mac, XP,
  • Compliance: GB, CE
  • Software: Replicator G (Both English and Chinese Edition)



Order Online Now
Or Call 1-866-606-3991




Order Online Now
Or Call 1-866-606-3991




Order Online Now
Or Call 1-866-606-3991




Order Online Now
Or Call 1-866-606-3991




Order Online Now
Or Call 1-866-606-3991




Order Online Now
Or Call 1-866-606-3991




Order Online Now
Or Call 1-866-606-3991




Order Online Now
Or Call 1-866-606-3991

Get Social For Savings
Like Us On FaceBook + Google & Receive Extra Savings, Call 1-866-606-3991

Text The Word: SAFER To 555888 For Extreme Steals And Deals!

Sign Up For VIP Steals & Deals...


Browse for more products in the same category as this item:

Electronics > Computers & Tablets > 3D Printers
Electronics > Computers & Tablets