Safer Wholesale carries
virtually every marine flywheel ever used in marine applications. There
are only two flywheel sizes used in GM based marine engines: a 12¾" and
a 14" flywheel (true inboard flywheels are always 14" with the ring
gear on the outside edge of the flywheel). The crank bolt pattern of
each engine (where the flywheel mates on the back crankshaft), is
different for each engine. Simply said, a 14" flywheel from a 4.3L
engine will not fit or bolt on a 5.7L engine, even though they are both 14" in diameter.
When
ordering a flywheel, first measure your flywheel diameter (most are
14"), identify the YEAR of the engine, then identify your exact engine
(3.0L, 4.3L, 5.7L, etc).
CALL 1-866-606-3991
New 14 inch flywheel made for 1987 and Later, 4.3L marine engines.
If you have an existing 4.3L marine engine (MerCruiser, Volvo Penta, OMC, etc) made from 1987 and later (commonly called a one-piece rear main seal or full seal), then this is the flywheel that is commonly used.
This flywheel is unique to a 4.3L engine. It will ONLY work on a 4.3L engine made from 1987 and later.
